Spray adhesive for foam plastic & textile

1891 is an affordable spray adhesive for foam plastic and textiles with soft spray lines and fast cutting. Instructions: 1. Shake the jar well before use. 2. Choose the spray width by adjusting the nozzle. 3. Hold the can about 15-20 cm from the surface and apply an even layer to the surface. 4. Apply the adhesive in 1-3 even layers (depending on the coverage required for the application). 5. Let it become sticky, fit the surfaces to be joined and press together strongly. Tip: Test the stickiness by gently touching the glue with your finger. If the glue sticks, it is too wet. If the glue is very sticky without sticking to the skin, it is ready for joining. If the glue is dry or has only a small bump, it is too dry and more glue must be applied to at least one of the surfaces. Application to a surface: For less demanding applications, spray on the least porous surface and allow the adhesive to dry for 1-4 minutes. Application on two surfaces: Permanent, for more demanding applications. Spray on both surfaces and let the glue dry for 2-4 minutes. Open time: 1-30 minutes. Coverage: Up to 3 m²/bottle (one surface application).